Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RAVAMID® C GF15 T BK45 - PA666-GF15 - Ravago Group

Material Data Center offers the following functions for RAVAMID® C GF15 T BK45:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ravamid C datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts

Polyamide Copolymer Blend 6/66 Black containing recycled material, 15% glass fiber reinforced, also available Heat Stabilized (H) and UV Stabilized (UV).

Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.003 mm/mm ASTM D 955
Mold Shrinkage, TD 0.009 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 3800 MPa ISO 527
Stress at break 90 MPa ISO 527
Strain at break 5 % ISO 527
Flexural modulus, 23°C 4200 MPa ISO 178
Izod notched impact strength, +23°C 14 kJ/m² ISO 180/1A
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 180[ann.] °C ISO 75-1/-2
Vicat softening temperature, B 195 °C ISO 306
Burning behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.6 mm -
Burning behav. at thickness h HB class IEC 60695-11-10
Thickness tested 3.2 mm -
Burning rate, FMVSS, Thickness 1 mm 100 mm/min ISO 3795 (FMVSS 302)
Glow Wire Flammability Index (GWFI) 650 °C IEC 60695-2-12
GWFI - thickness tested (1) 2 mm -
ann.: annealed
Other propertiesValueUnitTest Standard
Humidity absorption 0.2 % Sim. to ISO 62
Density 1180 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 85 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.12 % -
Melt temperature 240 - 280 °C -
Mold temperature 60 - 80 °C -
Zone 1 230 - 240 °C -
Zone 2 250 - 260 °C -
Zone 3 260 - 270 °C -
Nozzle temperature 260 - 265 °C -
Screw speed 50 - 80 rpm -
Back pressure 0.4 - 0.8 MPa -
Holding pressure 6 - 8 MPa -
Characteristics
Processing
Injection Molding
Delivery form
Black
Special Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Features
Copolymer
Certifications
Recycled Resin Content
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.